Laboratory furniture

Active PCR Cabinet with built-in UV Decontamination and true vertical laminar airflow.Average Airflow Velocity (adjustable): 0.3 m/sHEPA filter with pre-filterThe air cleanliness within the work zone is better than ISO Class 5Sentinel-Microprocessor maintains steady blower speed (only 0.9 m and 1.2 m models)Hinged polycarbonate front windowTempered glass side panelISOCIDE™ antimicrobial coating on all painted surfaces minimizes contamination.Fluorescent lighting provides superior illumination of the work zoneBuild-in UV lamp with timerPass-through ports in the back wallOptions on request:Support stands

Class II according to DIN 12469Ergonomically angled and frameless front sashA large easy-to-read digital display and ergonomically sized touchpadTempered glass side walls (S-Series with stainless steel side walls)Esco triple-wall design with negative pressure prevents the possibility of contamination from leaksISOCIDE™ antimicrobial coating on all painted surfaces minimises contaminationQuickstart ModeSentinel-Microprocessor maintains steady blower speedRS232 serial interface portMore options on request, e.g. prefilter at intake socketModel variations:Model type E and S: Single ULPA-Filter/H14Model type G: Dual ULPA-Filter/H14Options on request:Electrical outlet, support stand, prefilter, service fixture, UV lamp, IV bar, single piece work surface for E-Series, IQ/OQ or KI DISCUS testPlease order support stand separately.

One of the silent Biological Safety Solutions from Esco. Class II according to DIN EN 12469.Dual-ULPA filterNoise emission <51 dBABest comfort and safety at a favourable priceEsco triple-wall design with negative pressure prevents the possibility of contamination from leaksErgonomically angled and motorized front sash for one hand operationA large easy-to-read digital display and ergonomically sized touchpadTempered glass side panelsSentinel-Gold-controller maintains steady blower speedSleep mode with 50% reduced power to save energy, to maintain safetyEsco ISOCIDE™ antimicrobial coating on all painted surfaces minimizes contaminationCertified according to EN 12469 by TÜV-Nord, GermanyOptions on request:Electrical outlet, support stand, prefilter, service fixture, UV lamp, IV bar, IQ/OQ or KI-Discus-Test

Compact, energy saving fume hood without ducting system.Independently tested and complies with AFNOR NFX 15-211 standardAverage Inflow Air Velocity: 0.5m/sEasy Filter changeSentinel-Microprocessor with LCD-Display, air velocity alarm and 24-hour-clockFluorescent lighting provides superior illumination of the work zoneSloped acrylic front windowWith transparent back wall (for type SPD-4B1)Acrylic side wallsISOCIDE™ antimicrobial coating on all painted surfaces minimises contamination.Stainless steel spill-retaining work top.Sampling portPass-through ports in the back wallPre-filter made of polyester fibre, EU3 rating is includedHood is delivered unassembled. On-site assembly can be completed in 60 mins. Without special tools.Options on request:Support stands, installationFor operation the main filters have to be ordered separately.

Compact, energy saving fume hood without ducting system.Independently tested and complies with AFNOR NFX 15-211 standardEasy Filter ChangeAverage Inflow Air Velocity: 0,4m/sSentinel-Microprocessor with LCD-Display, air velocity alarm and 24-hour-clockFluorescent lighting provides superior illumination of the work zoneTempered glass sliding sashTempered glass side panelISOCIDE™ antimicrobial coating on all painted surfaces minimizes contamination.Stainless steel worktopModel variations:Model type B: Pre-filter, main filter (activated carbon, different filter types available)Model type C: Pre-filter, main filter (activated carbon, different filter types available), back-up filter (activated carbon, different filter types available)Model type E: Pre-filter, main filter (activated carbon, different filter types available), back-up filter (HEPA filter)Options on request:Filter, electrical outlet, VOC sensor, service fixture, swan-neck faucet, Drip Cup (PP), support stand, installationFor operation the main filters and the back-up filter (Modell type C) have to be ordered separately.

The new generation of ESCO Airstream horizontal and vertical laminar flow benches offer optimal product protection by achieving ISO Class 5 conditions inside the cabinet.Features:Energy-efficient DC ECM motorsStable and self-compensating airflowSentinel Gold microprocessor controlControl panel to easily monitor the operating parametersStandby mode reduces power consumption while maintaining the ISO class 5 conditions inside the work benchVisual and audible alarmsSide windows made of safety glassStandard working space height vertical/horizontal benches: 689 mm/573 mmAdditional working space heights on request.ULPA filter with long service life and protection meshPre-filter EU3ISOCIDE antimicrobial coating on all painted surfaces minimizes contaminationApparatus for UV lamp with timer (UV lamp and protective cover must be ordered separately)Options on request:Stands, electrical sockets (4.662 021), front covers with UV lamp, IQ/OQPlease order stands separately.

The new generation of ESCO Airstream horizontal and vertical laminar flow benches offer optimal product protection by achieving ISO Class 5 conditions inside the cabinet.Features:Energy-efficient DC ECM motorsStable and self-compensating airflowSentinel Gold microprocessor controlControl panel to easily monitor the operating parametersStandby mode reduces power consumption while maintaining the ISO class 5 conditions inside the work benchVisual and audible alarmsSide windows made of safety glassStandard working space height vertical/horizontal benches: 689 mm/573 mmAdditional working space heights on request.ULPA filter with long service life and protection meshPre-filter EU3ISOCIDE antimicrobial coating on all painted surfaces minimizes contaminationApparatus for UV lamp with timer (UV lamp and protective cover must be ordered separately)Options on request:Stands, electrical sockets (4.662 021), front covers with UV lamp, IQ/OQPlease order stands separately.

The Esco Cytoculture Cytotoxic Safety Cabinet provides the highest level of patient, pharmacist and environmental protection in cytotoxic/antineoplastic drug processing. The unique demands of handling and preparing cytotoxic drugs for use in chemotherapy require a specialized cabinet. As cytotoxic drugs cannot be inactivated by chemical decontamination, Class II biosafety cabinets should not be used. With this in mind Esco has developed a highly specialized range of cabinets designed especially for handling these potentially dangerous drugs.3-fold filter systemWith V-shaped Hepa filter Sentinel™ microprocessor controller supervises all functionsMotorized sash simplifies transfer of materials into the work zoneTested according to DIN 12980, EN 12469, ISO 14644.1 Class 3, EN-1822Options on request:Electrical outlet, service fixture, UV lamp, IV bar, carbon filter

Certified according to EN 12469 by TÜV-Nord, GermanyErgonomically angled and motorized front sash for one handed operation (aerosol tight gasket)Dual Energy efficient DC ECM motorSentinel-Gold-controller maintains steady blower speedTempered glass side panels with E-SeriesLED lampEsco triple-wall design with negative pressure prevents the possibility of contamination from leaksMulti-piece work surface removal simplifies cleaning for E-SeriesULPA-Filter/H14Esco ISOCIDE antimicrobial coating on all painted surfaces minimizes contaminationQuickstart ModeRS232 serial interface portOptions on request:Electrical outlet, support stand, prefilter, service fixture, UV lamp, IV bar, single piece work surface for E-Series, IQ/OQ or KI DISCUS test, RS485 serial interface port for using Voyager SoftwarePlease order support stand separately.

Certified according to EN 12469 by TÜV-Nord, GermanyErgonomically angled and motorized front sash for one handed operation (aerosol tight gasket)Dual Energy efficient DC ECM motorSentinel-Gold-controller maintains steady blower speedStainless steel side walls with S-SeriesLED lampEsco triple-wall design with negative pressure prevents the possibility of contamination from leaksSingle piece work surface with sink for S-SeriesULPA-Filter/H14Esco ISOCIDE antimicrobial coating on all painted surfaces minimizes contaminationQuickstart ModeRS232 serial interface portOptions on request:Electrical outlet, support stand, prefilter, service fixture, UV lamp, IV bar, single piece work surface for E-Series, IQ/OQ or KI DISCUS test, RS485 serial interface port for using Voyager SoftwarePlease order support stand separately.

Material stainless steel (1.4301 / AISI 304)Functional surfaces in KEK-FinishTo dispense ofdisposable items (hoods, gloves, etc.)1 - 4 boxesHinged lid with bow handle for fillingViewing slots on the front to monitor the filling levelEmbossed removal openingRemovable drip tray arranged under the removal opening2 mounting holes on the back for wall mounting

Clean room worktable consisting of worktop and underframeMaterial stainless steel (1.4301 / AISI 304)Table top made of 1.5 mm thick stainless steel42 mm bevelled on all sides, 12 mm of which 15 ° after folded inside Functional surfaces in KEK-Finish smooth surface depending on design and dimensions stabilized by reinforcementBase frame made of square tubesGround floor with smooth surface firmly weldedFloor leveling

Clean room worktable consisting of worktop and underframeMaterial stainless steel (1.4301 / AISI 304)Table top made of 1.5 mm thick stainless steel 42 mm bevelled on all sides, 12 mm of which 15 ° after folded inside Functional surfaces in KEK-Finish Dimension punching (ø10 mm in the grid 15 x 15 mm) to support the laminar flow of air depending on design and dimensions stabilized by reinforcementBase frame made of square tubesGround floor with perforated surface dimension punching (ø10 mm in the grid 15 x 15 mm) firmly weldedFloor leveling

Cleanroom racks consisting of base frame and welded in shelves.Material stainless steel (1.4301 / AISI 304)Functional surfaces in KEK-FinishBase frame made of square tubeupper ends closed with plastic capsFloor leveling with disc feets made of CNS (+/- 10 mm)Shelves, folded on all sidesfirmly weldedsmooth surfacefor perforated version: Dimension punching ø 10 mm in 15 x 15 mm grid to support the laminar flow of airdepending on design and dimensions stabilized by reinforcement

Wardrobe consisting of a base frame and coat hangersMaterial stainless steel (1.4301 / AISI 304)Firmly welded hangersBase frame made of square tubeCrossbar for stabilizationSquare profiles with plastic caps (black) closed at the topFloor leveling with disc feet made of CNS (+/- 10 mm)Variants with 9, 12, 15 coat hangers

Wardrobe consisting of a base frame and coat hangersMaterial stainless steel (1.4301 / AISI 304)Firmly welded hangersBase frame made of square tubeSquare profiles with plastic caps (black) closedPrepared for on-site wall mounting4 with plastic caps (black) closed mounting holesWithout fastening materialVariants with 7, 8, 9, 10, 11 coat hangers

Sit-Over-Bench consisting of seating area, compartments for shoes and plinthMaterial: AISI 304Working surfaces: KEK-FinishSingle sided version with rear panel or double sided versionShoe boxes in three rows

Sit-Over-Bench consisting of seating area and base frame with single walled, angular welded in shoe shelvesMaterial: AISI 304Working surfaces: KEK-FinishDouble sided versionStorage place for 3 pairs of shoes each sideBase frame made of square tubesAdjustable feets (+ 10 mm)

Premium rubber anti-fatigue mat.Shaped bevelled edgesSilicone und Latex-freeSuitable for use in cleanrooms of class ISO 53 years warranty

Made of aluminum, with large steel steps of 30 x 21 cm and anti-slip mats. Narrowly foldable to 5 cm.Stands securely due to the non-slip plug-in foot that stands up over the entire surface.Folding safety mechanism (safety lock)Ergonomic square tube bracketCan be loaded up to 150 kg* Height of first step (cm)

The design of the chair is conventional and there are no risk factors. The materials used are characterised by maximum resistance against typical industrial effects. For instance, the connecting element between seating surface and backrest is made from robust steel, as is the sturdy base. Furthermore, the practical functional handles ensure safe handling during transport between different areas of use. The height of the seat and backrest as well as the seat depth and seattilt can be quickly adjusted to the respective body size.All settings can be performed using just one handWith certificate "Tested Safety" (GS mark)Choice of 4 upholstery materialsNexxit 1 with gliderNexxit 2 with castorsNexxit 3 with glides and foot ringWith or without coloured handles (blue, grey, orange, green or black)10 years warranty, Made in GermanyUpholstery variant SupertecSupertec combines the benefits of fabric and integral foam (PU).Soft and comfortableFirmBreathableVery resistantNon-slipEasy to clean

For demanding cell culture applications and other sensitive work requiring assured safety for product, personnel and environment.Interior made of stainless steel, with LED lightsGUI touchscreen interfaceSmartFlow plus auto compensationCross beam UV in side wallsElectronic front sash windowHinged front window for easy cleaning and disinfection of the interiorSloped front window allows fatigue free workingPadded, ergonomically adjustable armrests (optional)2 x Smart Ports for feeding trough vacuum tubes and cablesOne touch auto start / stop functionCloud ready data outputUSB data outputsEN 12469

For CMR substances (carcinogenic, mutagenic, reprotoxic) and other work requiring assured safety for product, personnel and environment. Each device has an integrated WLAN function and can be connected immediately.Interior made of stainless steel, with LED lightsGUI touchscreen interface SmartFlow plus auto compensationCross beam UV in side wallsPadded, ergonomically adjustable armrests (optional)2 x Smart Ports for feeding trough vacuum tubes and cablesCloud ready data outputEN 12469 and DIN 12980

Ideal for easy marking of new, smooth floors, e.g. for traffic guidedance.Quick application High visibilityRubber adhesive for optimal bondingUV resistantRoll of 30 m length