Syringe filters & filter holders

The syringe filters are used for filtration of suspended matter from liquid samples and are certified for HPLC. Standard CHROMAFIL syringe filters are color coded. CHROMAFIL Xtra syringe filters are labeled for method validation and certification. All CHROMAFIL syringe filters are autoclavable (121 °C and 1.1 bar for 30 min).A hydrophobic membrane. Ideal for filtration of non-polar liquids and gases. It is very resistant to various solvents as well as acids and bases. By flushing with alcohol, followed by water, the original hydrophobic membrane can be made more hydrophilic.

Hydrophilic membrane for polar as well as non-polar solvents. The HPLC filter, especially suited for mixtures of water and organic solvents; for TOC/DOC determination; not cytotoxic, does not inhibit the growth of microorganisms and higher cells. Polyester filter with integrated glass fibre prefilter (GF/PET): recommended for solutions with a high load of particulate matter or for highly viscous solutions.

The syringe filters are used for filtration of suspended matter from liquid samples and are certified for HPLC. Standard CHROMAFIL syringe filters are color coded. CHROMAFIL Xtra syringe filters are labeled for method validation and certification. All CHROMAFIL syringe filters are autoclavable (121 °C and 1.1 bar for 30 min).Hydrophilic membrane with very low adsorption for aqueous and organic/aqueous liquids i.e. polar and medium polar sample solutions. Binding capacity for proteins 84µg/25mm filter.

96er Polypropylenplatten für die parallele Filtration von 96 ProbenVorteile dieses Systems mit hohem Durchsatz:wirtschaftlich, da Zeit und Lösemittel eingespart werdenVerwendung von Mehrkanalpipetten vereinfacht den Flüssigkeitstransferleicht an handelsübliche Automatisierungs- und Robotersysteme anzupassenminimales Totvolumen (£ 40 µl)Die Membranmaterialien entsprechen den jeweiligen CHROMAFIL® Spritzenvorsatzfiltern

Syringe filters are suitable for rapid sample filtration and are used in a variety of applications, such as capillary electrophoresis, protein filtration, and UV spectroscopy sample preparation. With female Luer lock inlet.For the ready-to-use filter units, only virgin raw material is used. This ensures that there is no interaction with the sample to be filtered, provided that the units are used properly. The filter units are intended for laboratory use only.Note: If syringes with a volume <10 ml are used, a pressure could be created which exceeds the max. operating pressure (700 kPa/7 bar) of the filter unit.Hydrophobic membrane. Ideal for filtration of non-polar liquids and gases.Housing made of PPOutlet male Luer coneAutoclavable at 121 °C

Disposable syringe filters for use with samples requiring inorganic ion analysis as the extractable ion content is minimized. The syringe filters contain 3 filtration layers that significantly reduce blockage and increase volume throughput. Layer 1 is a 20 µm polypropylene filter, layer 2 is a 5 µm polypropylene filter, and layer 3 is the membrane filter which filters down to 45 µm.Housing made of PPFemale Luer-Lock inletMale Luer outletAutoclavable at 121 °CHydrophilic membrane made of nylon.

Disposable syringe filters for use with samples requiring inorganic ion analysis as the extractable ion content is minimized. The syringe filters contain 3 filtration layers that significantly reduce blockage and increase volume throughput. Layer 1 is a 20 µm polypropylene filter, layer 2 is a 5 µm polypropylene filter, and layer 3 is the membrane filter which filters down to 45 µm.Housing made of PPFemale Luer-Lock inletMale Luer outletAutoclavable at 121 °CHydrophobic membrane made of PTFE.

Preisgünstige Spritzenvorsatzfilter für die effiziente Filtration einer großen Palette von Lösungsmitteln, sowie wässrigen oder anorganischen Lösungen. Diese Spritzenvorsatzfilter decken die meisten Anwendungen in der HPLC, in pharmazeutischen, umweltbezogenen, biotechnologischen, Lebensmittel- und Getränkelaboratorien ab.Robustes Gehäuse aus PolypropylenMit weiblichem Luer-Lock-Eingang und männlichem Luer-Slip-AusgangPassend für alle Spritzen mit Luer-AnschlussHydrophile Membran zur Filtration wässriger FlüssigkeitenSehr geringe Protein-BindungskapazitätBesonders geeignet für biologische Makromoleküle, wasserlösliche Oligomere und PolymereSterile Filter einzeln verpackt in einer Hartblisterverpackung und Spenderbox.Nur für Forschung und Entwicklung.

Preisgünstige Spritzenvorsatzfilter für die effiziente Filtration einer großen Palette von Lösungsmitteln, sowie wässrigen oder anorganischen Lösungen. Diese Spritzenvorsatzfilter decken die meisten Anwendungen in der HPLC, in pharmazeutischen, umweltbezogenen, biotechnologischen, Lebensmittel- und Getränkelaboratorien ab.Robustes Gehäuse aus PolypropylenMit weiblichem Luer-Lock-Eingang und männlichem Luer-Slip-AusgangPassend für alle Spritzen mit Luer-AnschlussHydrophile Membran zur Filtration wässriger, organischer und mittelpolarer LösungenSehr gute chemische Beständigkeit gegenüber Estern, Basen und Alkoholen

Whatman GD/X syringe filters are the perfect solution for samples with high viscosity or samples that contain particles. Four filter layers decrease clogging and therefore filter exchange during processing is avoided. These filters allow 3 to 7 times higher throughput than traditional types.Whatman GD/X syringe filters are the perfect solution for samples with high viscosity or samples that contain particles. Four filter layers decrease clogging and therefore filter exchange during processing is avoided. These filters allow 3 to 7 times higher throughput than traditional types.

Whatman GD/X syringe filters are the perfect solution for samples with high viscosity or samples that contain particles. Four filter layers decrease clogging and therefore filter exchange during processing is avoided. These filters allow 3 to 7 times higher throughput than traditional types.Whatman GD/X syringe filters are the perfect solution for samples with high viscosity or samples that contain particles. Four filter layers decrease clogging and therefore filter exchange during processing is avoided. These filters allow 3 to 7 times higher throughput than traditional types.

Minisart® NML with surfactant-free cellulose acetate membrane (SFCA) for all aqueous solutions with a pH of 4 to 8.Housing made of MBSColour codedSterilisable by ethylene oxide (EO) or gamma irradiation

Minisart HY with hydrophobic PTFE membrane for oily solutions or gases. Housing made of MBS.

The coating-free hydrophobic PTFE membrane is suitable for removal of particles and microorganisms from liquids, gases and harsh chemicals.Housing made of PPLow adsorptionPrinted for easy membrane and pore size identification

Preisgünstige Spritzenvorsatzfilter für die effiziente Filtration einer großen Palette von Lösungsmitteln, sowie wässrigen oder anorganischen Lösungen. Diese Spritzenvorsatzfilter decken die meisten Anwendungen in der HPLC, in pharmazeutischen, umweltbezogenen, biotechnologischen, Lebensmittel- und Getränkelaboratorien ab.Robustes Gehäuse aus PolypropylenMit weiblichem Luer-Lock-Eingang und männlichem Luer-Slip-AusgangPassend für alle Spritzen mit Luer-AnschlussHydrophile Membran für wässrige, polare und leicht unpolare LösungenSehr geringe ProteinbindungskapazitätFür hohe Durchflussraten geeignetIdeal für biologische Makromoleküle, wasserlösliche Oligomere und PolymereSterile Filter einzeln verpackt in einer Hartblisterverpackung und Spenderbox.Nur für Forschung und Entwicklung.

High-performance syringe filters can be used for general clarification or for application-specific purposes such as dissolution, HPLC, and IC. Specially developed for use in automated and semi-automated systems. The robust PP filter housing can withstand high operating pressures. With female Luer lock inlet and male Luer slip outlet.The syringe filters are pre-stacked in tubes in the AutoPack packaging. The carousel of the automatic filter changer can be loaded directly with these tubes.

High-performance syringe filters can be used for general clarification or for application-specific purposes such as dissolution, HPLC, and IC. Specially developed for use in automated and semi-automated systems. The robust PP filter housing can withstand high operating pressures. With female Luer lock inlet and male Luer slip outlet.High-performance syringe filters can be used for general clarification or for application-specific purposes such as dissolution, HPLC, and IC. Specially developed for use in automated and semi-automated systems. The robust PP filter housing can withstand high operating pressures. With female Luer lock inlet and male Luer slip outlet.

High-performance syringe filters can be used for general clarification or for application-specific purposes such as dissolution, HPLC, and IC. Specially developed for use in automated and semi-automated systems. The robust PP filter housing can withstand high operating pressures. With female Luer lock inlet and male Luer slip outlet.The syringe filters are pre-stacked in tubes in the AutoPack packaging. The carousel of the automatic filter changer can be loaded directly with these tubes.

High-performance syringe filters can be used for general clarification or for application-specific purposes such as dissolution, HPLC, and IC. Specially developed for use in automated and semi-automated systems. The robust PP filter housing can withstand high operating pressures. With female Luer lock inlet and male Luer slip outlet.High-performance syringe filters can be used for general clarification or for application-specific purposes such as dissolution, HPLC, and IC. Specially developed for use in automated and semi-automated systems. The robust PP filter housing can withstand high operating pressures. With female Luer lock inlet and male Luer slip outlet.

High-performance syringe filters can be used for general clarification or for application-specific purposes such as dissolution, HPLC, and IC. Specially developed for use in automated and semi-automated systems. The robust PP filter housing can withstand high operating pressures. With female Luer lock inlet and male Luer slip outlet.The syringe filters are pre-stacked in tubes in the AutoPack packaging. The carousel of the automatic filter changer can be loaded directly with these tubes.

High-performance syringe filters can be used for general clarification or for application-specific purposes such as dissolution, HPLC, and IC. Specially developed for use in automated and semi-automated systems. The robust PP filter housing can withstand high operating pressures. With female Luer lock inlet and male Luer slip outlet.High-performance syringe filters can be used for general clarification or for application-specific purposes such as dissolution, HPLC, and IC. Specially developed for use in automated and semi-automated systems. The robust PP filter housing can withstand high operating pressures. With female Luer lock inlet and male Luer slip outlet.

Single-use syringe filters for the filtration of solvents and aqueous solutions for sample clean-up and preparation. These syringe filters are suitable for a wide range of applications, e.g. liquid chromatography, mass spectrometry, and ion chromatography. Filter housing made of PP. With female Luer-Lock inlet.Excellent chemical compatibility with esters, bases, and alcohols. No pre-wetting required. Suitable for HPLC.

Single-use syringe filters for the filtration of solvents and aqueous solutions for sample clean-up and preparation. These syringe filters are suitable for a wide range of applications, e.g. liquid chromatography, mass spectrometry, and ion chromatography. Filter housing made of PP. With female Luer-Lock inlet.Specially developed for ion chromatography applications. Hydrophilic Supor™ (PES) membrane is recommended for aqueous samples. Low protein binding.