Heating cabinets

Drying and heating chambers are suitable for routine drying and sterilisation tasks with homogeneous temperature distribution.High temperature accuracy thanks to APT.line™ technologyElectromechanical control of the exhaust air flapChambers up to 115 l are stackableErgonomic handle designUSB connection for data recordingClass 2 integrated independent adjustable temperature safety device (DIN 12880) with visual alarmWith natural convectionController with LCD display

Drying and heating chambers are suitable for routine drying and sterilisation tasks with homogeneous temperature distribution.High temperature accuracy thanks to APT.line™ technologyElectromechanical control of the exhaust air flapChambers up to 115 l are stackableErgonomic handle designUSB connection for data recordingClass 2 integrated independent adjustable temperature safety device (DIN 12880) with visual alarmWith forced convectionController with LCD display

With their maximum working temperature of 300 °C and forced air circulation, the TR series ovens achieve very good temperature uniformity. They can be used for various applications such as e.g. drying, sterilising or warm storing. The stainless steel interior chamber is easy to clean and resistant to rust.Models TR 60 to TR 240 designed as tabletop modelsModels TR 420 and TR 1050 designed as floor standing modelsHorizontal, forced air circulation results in temperature uniformity better than ±5 °CStainless steel chamber, alloy 304 (AISI)/(DIN material no. 1.4301), rust-resistant and easy to cleanLarge handle to open and close the doorCharging in multiple layers possible using removeable trays (number of removeable trays included, see table below)Large, wide-opening swing door, hinged on the right with quick release for models TR 60 to TR 420Double swing door with quick release for TR 1050TR 1050 equipped with transport castorsPID microprocessor control with self-diagnostic systemInfinitely adjustable exhaust at the rear wall with operation from the frontAvailable controller variants are the R 7 as basic variant with adjustable holding temperature or the programmable controllers B 510 (with touch panel, 5 programs with 4 segments each) and C 550 (with touch panel, 10 programs with 20 segments each)Solid state relays provide for low noise operation220-240 V 1/N/PE 50/60 Hz connector as standardOption:Over-temperature limit controller with manual reset for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and loadInfinitely adjustable fan speed of the air-circulationWindow for observing chargeFurther removeable grids with railsSide inletStainless steel collecting pan to protect the furnace chamberDoor hinges on the left sideReinforced bottom plateSafety technology according to EN 1539 for charges containing liquid solvents (TR .. LS) up to model TR 240 LS, achievable temperature uniformity ±8 °CTransport castors for model TR 450Upgrading available to meet the quality requirements of AMS 2750 E or FDAProcess control and documentation via VCD software package for monitoring, documentation and control

The Memmert humidity chamber HCP - This climate chamber offers a full range of comfort, reliability and safety. This humidity chamber is ideally suited for environmental testing, environmental simulation, accelerated service life tests and 85/85 tests according to IEC 60068-2-67 and IEC 60068-2-78.The active humidity control is the guarantee for ideal homogeneity of temperature and humidity as well as for short recovery times after opening the door. In combination with heating on all six sides, including heated inner glass door, it also minimises vaporisation in the interior and thus the risk of condensed water dripping onto the test object. An aluminium thermal conductive layer supports optimum temperature distribution and serves as a heat accumulator in case of a temporary power failure.Model variant TwinDISPLAY: ControlCOCKPIT with two colour displaysYou can find a detailed description of the "TwinDISPLAY" model at www.memmert.com

Reliable, comfortable and energy-efficient - that's how vacuum drying works today. Separately adjustable and directly heated thermoshelves ensure precise temperature control and, thanks to the digital pressure control, the chamber load is not only dried at high speed but also extremely gently in our powerful and robust vacuum drying oven.Safety glass door with armoured glass on the inside and splinter shield on the outsideDigital pressure controlDirectly heated and individually controllable thermoshelvesWith 2 thermoshelf connectionsOptional: Pump base cabinet and energy-efficient vacuum pumpModel variant TwinDISPLAY: ControlCOCKPIT with two colour displaysYou can find a detailed description of the "TwinDISPLAY" model at www.memmert.comScope of supply: Vacuum drying oven, 1 aluminium thermoshelf, calibration certificate (for 160 °C at 20 mbar), software AtmoCONTROL

Premium module: The premium module comprises the inert gas inlet (only sizes 49/101), extra connectors for thermoshelves, one for VO29, two for VO49/VO101, an additional thermoshelf for model size 49/101.Vacuum pump module: Without pump with antivibration metal plate at the bottom to accommodate the vacuum pump, including full-sight glass door, socket, signal cable and connecting hose to the vacuum oven.Chemical-resistant vacuum pump: With 4x diaphragm, pump capacity: approx. 50 Nl/min = 3.0 m/h³, automatic purge control, with signal cable (3 m) to control the rotation speed and vacuum connecting hose (3 m).

The units are suitable for apptications in the pharmaceutical or life science sector. Optimal incubation conditions due to temperature, light, and humidity control.Stainless steel interior and shelvesMassive doorDirected horizontal airflow systemAdjustable defrost timerOver- and under-temperature protectionRefrigerant R-513AHeight-adjustable, vertical light modules (optional)Programmable light cycles: on/off cycles for every day of the week, dawn/dusk simulationsAccess port Ø 54 mm

Inclusive fasteners.

Shelves made of stainless steel, perforated.If you are ordering replacement shelves, please provide the serial number prior to ordering, since it might be necessary to order other shelves with different dimensions.

Max. load per rack 70 kg.

Drying and heating chambers are suitable for routine drying and sterilisation tasks with homogeneous temperature distribution.Uniform drying conditions thanks to APT.line™ preheating chamber technologyIdentical test conditions throughout the chamber interior independent of sample size and quantityAdjustable exhaust air flapClass 2 independent adjustable temperature safety device (DIN 12880) with visual alarmWith natural convectionController with timer functions

Drying and heating chambers are suitable for drying and heat storage in research and quality assurance.Easy handlingAccurate temperature controlSimple and ergonomic door openingAPT.line™ preheating chamber technologyAdjustable exhaust air flapController with timer functionClass 2 integrated independent adjustable temperature safety device (DIN 12880) with visual alarmWith natural convection for homogenous temperature distribution.

Drying and heating chambers are suitable for drying and heat storage in research and quality assurance.Easy handlingAccurate temperature controlSimple and ergonomic door openingAPT.line™ preheating chamber technologyAdjustable exhaust air flapController with timer functionClass 2 integrated independent adjustable temperature safety device (DIN 12880) with visual alarmWith forced convection for homogenous temperature distribution.

Drying and heating chambers are suitable for routine drying and sterilisation tasks with homogeneous temperature distribution.High temperature accuracy thanks to APT.line™ technologyElectromechanical control of the exhaust air flapChambers up to 115 l are stackableErgonomic handle designUSB connection for data recordingClass 2 integrated independent adjustable temperature safety device (DIN 12880) with visual alarmWith forced convectionController with LCD display and enhanced timer functionsAdjustable fan speedEthernet interface

The material test chambers are suitable for material testing and ageing tests thanks to their versatile programming options. Powerful fan with high air flow rate ensures fast heat-up.High temperature accuracy thanks to APT.line™ technology with increased heating outputReinforced fan with adjustable speedElectromechanical control of the exhaust air flapTouchscreen controller with time-segment and real-time programmingClass 2 independent adjustable temperature safety device (DIN 12880) and class 3.1 independent temperature safety device (DIN 12880) with visual/acoustic alarm available for selection on the controllerFailsafe function-backup sensor Pt 100Internal data logger, measured values can be read out in open format via USBEthernet interface2 chrome-plated racks

For gentle, fast drying without residues, incrustations or oxidation.Direct heat transfer through large thermal conducting platesProgram-controlled drying monitoring with automatic ventilation at end of processInternal data logger, measured values can be read out in open format via USBInert gas connectionShatterproof, spring-mounted safety glass panelLarge viewing windowAluminum expansion racks, can be custom-positionedEthernet interfaceFor non-flammable solventsController with digital display of pressure and temperatureAccess port DN 16

For gentle, fast drying without residues, incrustations or oxidation.Direct heat transfer through large thermal conducting platesProgram-controlled drying monitoring with automatic ventilation at end of processInternal data logger, measured values can be read out in open format via USBInert gas connectionShatterproof, spring-mounted safety glass panelLarge viewing windowAluminum expansion racks, can be custom-positionedEthernet interfaceFor flammable solventsATEX conformity for units: EX II 2/3/- G IIB T3 Gb/Gc/- XIntuitive touchscreen controller with graphical pressure and temperature displayPressure control device for heating activated from <100 mbar

Environmental chambers are ideal for material testing under dynamic conditions. The standard rapid alternation speeds of approx. 5 K/min enable standard-compliant testing.Homogeneous climate conditions thanks to APT.line™ preheating chamber technologyTouchscreen controller with time-segment and real-time programmingInternal data logger, measured values can be read out via USBProgrammable condensation protectionTroubleshooting system with visual and acoustic alarmsHeated viewing window with LED interior lightingBINDER Multi Management Software APT-COM™ Basic EditionClass 2 independent adjustable temperature safety device (DIN 12880) with visual alarmEthernet interfaceAdjustable ramp functionIntegrated chart recorderDoor heatingInner chamber made of stainless steel1 stainless steel rackCFC-free refrigerant R-452AModels with 480 V nominal voltage are equipped with a voltage and frequency converter.

Environmental chambers are ideal for material testing under dynamic conditions. The standard rapid alternation speeds of approx. 5 K/min enable standard-compliant testing.Homogeneous climate conditions thanks to APT.line™ preheating chamber technologyTouchscreen controller with time-segment and real-time programmingInternal data logger, measured values can be read out via USBProgrammable condensation protectionTroubleshooting system with visual and acoustic alarmsHeated viewing window with LED interior lightingBINDER Multi Management Software APT-COM™ Basic EditionClass 2 independent adjustable temperature safety device (DIN 12880) with visual alarmEthernet interfaceAdjustable ramp functionIntegrated chart recorderDoor heatingInner chamber made of stainless steel1 stainless steel rackHumidity regulation with capacitive humidity sensor and responsive steam humidificationAutomatic water and wastewater managementIntegrated 20 l water storage tank4 zero-voltage relay contactsCFC-free refrigerant R-452AModels with 480 V nominal voltage are equipped with a voltage and frequency converter.

Environmental chambers are ideal for material testing under dynamic conditions. The standard rapid alternation speeds of approx. 5 K/min enable standard-compliant testing.Homogeneous climate conditions thanks to APT.line™ preheating chamber technologyTouchscreen controller with time-segment and real-time programmingInternal data logger, measured values can be read out via USBProgrammable condensation protectionTroubleshooting system with visual and acoustic alarmsHeated viewing window with LED interior lightingBINDER Multi Management Software APT-COM™ Basic EditionClass 2 independent adjustable temperature safety device (DIN 12880) with visual alarmEthernet interfaceAdjustable ramp functionIntegrated chart recorderDoor heatingInner chamber made of stainless steel1 stainless steel rackHumidity regulation with capacitive humidity sensor and responsive steam humidificationAutomatic water and wastewater managementIntegrated 20 l water storage tank4 zero-voltage relay contactsCFC-free refrigerant R-452A and R-23Models with 480 V nominal voltage are equipped with a voltage and frequency converter.

Environmental chambers are ideal for material testing under dynamic conditions. The standard rapid alternation speeds of approx. 5 K/min enable standard-compliant testing.Homogeneous climate conditions thanks to APT.line™ preheating chamber technologyTouchscreen controller with time-segment and real-time programmingInternal data logger, measured values can be read out via USBProgrammable condensation protectionTroubleshooting system with visual and acoustic alarmsHeated viewing window with LED interior lightingBINDER Multi Management Software APT-COM™ Basic EditionClass 2 independent adjustable temperature safety device (DIN 12880) with visual alarmEthernet interfaceAdjustable ramp functionIntegrated chart recorderDoor heatingInner chamber made of stainless steel1 stainless steel rack4 zero-voltage relay contactsCFC-free refrigerant R-452A and R-23Models with 480 V nominal voltage are equipped with a voltage and frequency converter.